Accurate guide of operating concrete batching plant

concrete mixing station
1, Check whether all aggregate storage bins are full of materials.

2, Check whether the gas circuit has air leakage and water leakage phenomenon, if any, timely disassemble, clean and replace it. In addition, inspect there is flexible pipe damage and aging.

3, Check the movement of each pneumatic butterfly valve is accurate. If the valve can not be tightly closed, operators should promptly adjust it to closing state.

4, Check whether there is suitable quantity of oil in the reduction gear box. The amount of oil should not be too much or too little (according to specifications).

5, Check whether each of lubricating point of screw conveyor has been added lubricating oil.
concrete batching plant

6, Check whether each of flexible connection of powder material weigher is well connected. It is prohibited to have loose phenomenon, otherwise a lot of powder would run out to cause serious environmental pollution.

7. Inspect whether each interface of the gas path is well sealed and whether there is flexible pipe damage and aging.

8. Make sure the discharge doors are tightly closed.

9, the gas tank, air compressor water.
As a professional concrete batching plant producer, Zhengzhou CamelWay Machinery has produced concrete batching equipment which can satisfy your different requirements. If you are interested in the concrete mixing equipment, please feel free to contact us.

Get Support Or Price