The host type: JS2000
The theory of production: 120m fand /h
The installed power: 210Kw
Application: widely used in large and medium-sized prefabricated plant and industrial and civil construction projects such as highway, bridge, water conservancy, wharf, etc.
The theoretical productivity of HZS120 concrete mixing station is 120m3/h, equipped with a JS2000 forced double horizontal shaft concrete mixer with a nominal capacity of 2000L and PLD3200 for the mixing machine. The whole set of equipment including the twin shaft mixer, batching machine, cement silo and screw conveyor, conveyor belt, microcomputer control room. The production of plastic, dry concrete and other concrete, high production efficiency, short mixing time, and beautiful appearance, widely used in large and medium-sized construction, road and bridge and production of concrete products in the prefabrication plant, is the ideal equipment for the production of commercial concrete.
HZS120 commercial concrete mixing station system:
1, star gear reducer, small size, high efficiency, extremely reliable.
2. The material of lining board and blade is high chromium wear resistant cast iron. The angle design is reasonable, the mixing effect is good, the speed is fast, and the service life is long. 3, four shaft end seal is equipped with automatic oiling system.
4, the discharge door is controlled by a hydraulic oil pump, and there are three stop points and manual brake.
5. Overweight design, excellent shock absorption
The aggregate is measured by the unloading door of the aggregate storehouse in the batching station, which is unloaded into the aggregate metering bucket, and then unloaded to the flat belt on the far turn, and a flat belt is sent to the inclined belt machine. The inclined belt conveyor is conveyed to the upper part of the mixer to wait for the instruction, while the cement and the fly ash are conveyed from the screw conveyor to the respective metering hopper. Line metering, water and admixture are measured by pumps and admixture pumps to their respective metering hops. After all kinds of materials are measured, the control system sends instructions to the mixer to stir in the mixer. After the mixing is completed, the discharging door of the mixer is opened and the concrete is unloaded into the agitator and then into the next working cycle.
The host type: JS2000