Sand Mixer

Overview

The Description and Function of Sand Mixer:

Sand mixer can crush the materials and mix them at the same time, so that it is the ideal equipment for producing baking-free brick, lime-sand brick, cement brick and refractory brick and for crushing and mixing coal ash, boiler slag and tailing slag.

Sand Mixer

The Structure Composition of Sand Mixer:

This machine is composed of machine rack, driving mechanism and rolling mechanism.

(1) The machine rack is composed of machine plate, sand discharging door, sampling gate, air switch and air switching valve.

(2) The driving mechanism consists of reducer, oil pump and stand column.

Features

This roller sand maker has the features of fast and even mixing, no caking and dead angle and low energy consumption.

Working principle

When the roller sand maker works, the electromotor drives the planet cage on the vertical shaft, and the under the both ends of the planet cage, there are a pair of mixing shovel which is rotating clockwise around the vertical shaft at a certain speed, and at the same time, the two pairs of mixing shovels revolve on its axis anticlockwise at a certain speed, and the two roller will grind the materials that are constantly stirring along the clockwise direction. This working method has the functions of grinding, kneading and mixing so that it is a new wheel rolling type mixing machine integrated with several features that other types of sand mixers do not have.

Technical data

Feeding Ratio Mixing Time Productivity Disk Diameter Roller(Dia./W) Total Transmission Ratio Pressure of One Roller Speed of Mainshast Dimensions Fill 30#-40# Lubricant Oil
in Gear Box
500kg(0.4m3) 2-3min 1000-13000kg/h 1820mm 750/240mm 43.06 0-3000N 34r/min 2080/1882/1755mm 10kg

Sand Washer

Overview

The Function and Advantages of Sand Washer:

Sand washer has high washing degree, reasonable structure and high output, and the driving part is separated from water and sand, so that its failure rate is far lower than the commonly used sand washing machine and it is the best choice for the upgrading and updating of the domestic sand washing industry.

Sand Washer

The Performance Characteristics and Application of Sand Washer:

Sand washer has many outstanding features such as simple structure, stable operation, high washing degree and high output so that it is widely used in many industrial departments such as building site, sand and stone plant, glass plant, power plant and concrete sand making. 

sand washing machine

Features

Sand washer has many outstanding features such as simple structure, stable operation, high washing degree and high output so that it is widely used in many industrial departments such as building site, sand and stone plant, glass plant, power plant and concrete sand making.

Working principle

When sand washer works, the power plant drives the impeller to slowly rotate after slowing down through the V-shaped belt, reducer and gear, and sand and stone materials go into the washing chute from the material cabin, and roll driven by the impeller and grind with each other to remove the impurities covering the surface of the sand and stone materials, and at the same time break the moisture layer coated on the sand particles for the purpose of dehydration. In the meantime, add water in it to form a strong water flow to timely wash away the impurities and foreign matters with small proportion and discharge them from the overflow port to complete the washing process.

Technical data

Specification
XS2200
XS2600
XS2900
XS3500
Wheel bucket diameter
(mm)
2200
2600
2900
3500
Rotation Speed
(r/min)
1-2
1-2
0.8-1.5
0.8-1.2
Processing capacity (t/h)
15-30
20-50
50-100
120-200
Motor power
(kw)
8P   4
8P   5.5
8P   7.5
8P   11
Total weight
(kg)
4300
5600
8100
9900
Dimensions (L×W×H)
(mm)
3150×1910×2280
3520×2390×2690
3820×2640×3200
4420×2930×3800

Sand Making Machine

Overview

The Handling Materials and Applicaiton of Sand Making Machine:

Sand Making Machine is suitable for the medium and fine crushing of various hard and crisp materials such as various rocks, abrasive materials, refractory, cement clinker, quartz stone, iron ore and concrete aggregate, and especially suitable for making building sand and road paving sand and stone.

sand making machine

The Inner Structure of Sand Making Machine:

Sand Making Machine is mainly composed of feeding device, distributor, and whirling motion crushing chamber, impeller, principal axis assembly, pedestal driving device and motor.

Sand Making Machine

Features

1. This machine is a new type medium and fine stone crushing machine developed in the 1990s and also the machine type that is widely used to replace cone crusher, double-roll crusher and ball mill in the world.

2. It has novel and unique structure and stable operation.

3. This machine is low in energy consumption, high in output and big in crushing ratio.

4. The equipment is small in size, simple and easy in operation and convenient in installation and maintenance.

Working principle

The materials go into the crusher from the feed hopper and are separated into two parts by the distributor. One part goes into the impeller rotating with high speed from the middle of the distributor, and is quickened inside the impeller, and the acceleration can reach hundred times of the acceleration of gravity, and then the materials will cast from the three uniformly distributed runners of the impeller at a speed of 60-70m/s, and impact and crush with the other part of materials which fall from around the distributor and then they will together impact to the material lining inside the vortex cavity. Bounced from the material lining, the materials will impact obliquely upward to the top of the whirling motion chamber which will change their movement direction again, so that materials will move down, and the materials launching from the runners of the impeller will form a continuous material curtain. In this way, the materials will get two times or more hitting, friction, grinding and crushing effect inside the whirling motion crushing chamber. The crushed materials will be discharged from the bottom discharging mouth. This process will form a closed-circuit system together with the cyclic screening system and generally speaking, after three times of cycle, the materials will be crushed below 20Moh.

Technical data

Model
specification
Max.feeding
size
(mm)
Power
(kw)
Rotation
speed of
impeller
(r/min)
Capacity
(t/h)
Overall
dimension
(L×W×H)
(mm)
Total
weight
(kg)
HX-06 35 4P   37-55 2000-3000 12-30 2500×1620×2600 5600
HX-07 45 4P   55-75 1500-2500 25-55 2700×1760×2800 7600
HX-09 50 4P   110-150 1200-2000 55-100 3900×2000×3070 12600
Model HXVSI-7611 HXVSI-8518 HXVSI-9526 HXVSI-1140
Capacity
(t/h)
Feed both
at center
and sides
120-180 200-260 300-380 450-520
Feed at
center
60-90 100-130 150-190 225-260
Max.feeding
size(mm)
Soft
material
35 40 45 50
Hard
material
30 35 40 45
Rotation
speed
(r/min)
1700-1890 1520-1690 1360-1510 1180-1310
Double Motor
power(kw)
4P   110 4P   180 4P   264 4P   400
Overall dimension
(L×W×H)(mm)
3700×2150×2100 4140×2280×2425 4560×2447×2778 5000×2700×3300
Total weight(t) 11.8 14.5 17.8 25.6
Power supply 380V 50HZ
Vibrating sensor Detect range 0.1-20mm/s continous and adjustable.
Lubrication
station
Double
motor
power of
oil pump
2×0.31Kw
Safety
assuance
Double oil pumps assure enough oil supply:automatic
switch off with no oil stream or pressure,water cooling
in summer,motor heating stare-up in winter.
Overall
dimension
(L×W×H)
(mm)
820×520×1270
Power of oil
tank heater
2KW