Cone crusher maintenance

1. The shaft of the compound crusher bears the full load of the negative machine, so good lubrication has a great bearing on the bearing life. It directly affects the service life and operating rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be good. The main oil filling place of this machine (1) Rotating bearing (2) Roller bearing (3) All gears (4) Moving bearing, sliding plane.
2. Looseness of newly installed tyres is liable to frequent checks.
3, pay attention to the work of all parts of the machine is normal.
4, pay attention to check the wear of the wear parts, always pay attention to replace the worn parts.
5, put the mobile device chassis plane should be out of dust and other objects to avoid the machine encountered the material can not be broken when the moving bearing can not move on the chassis cone crusher, resulting in serious accidents.
6, If the bearing oil temperature rises, you should immediately stop and check the cause to eliminate it.
7, if the impact sound of the rotating gear during operation should immediately stop and check, and eliminate
Installation test:
1. The cone crusher should be installed on a horizontal concrete foundation and fixed with anchor bolts.
2, the installation should pay attention to the vertical and horizontal body.
3, After installation, check whether the bolts in each part are loose and whether the main door is tight. If yes, tighten it.
4, according to the power of the device configuration power cord and control switch.
5, the inspection is completed, the empty load test, the test can be normal production.

Get Support Or Price