Concrete mixing station to buy

In the purchase of concrete mixing plant, the user must choose a good product, such as improper selection, the user in addition to the unnecessary one-time high procurement costs, but also in the entire period of time to pay a heavy price, such as low efficiency High cost, high operating costs, poor product quality, and even equipment can not run properly. Similarly, different materials on the control of the requirements are also quite different.

In addition, attention is paid to the enlargement of equipment. Zoom involved in fluid mechanics, mechanics, thermodynamics, materials science, dust, electrical appliances, control and other disciplines. In this regard, largely depends on the experience of industrialization, the physical properties of materials and understanding of the equipment. In the process of enlargement may occur in the phenomenon should be rational, objective prediction, and can put forward the appropriate program. The so-called research amplification effect, is to master the drying theory, drying technology at the same time, pay attention to the accumulation of practical experience, lessons learned.

What should be the degree of electrical requirements of a small concrete mixing plant?

Concrete mixing station in the work must ensure that the electrical system can keep up with the work flow, so the performance requirements of the electrical system is also very high, and what specific requirements, we will introduce.
1. small concrete mixing station sometimes need to work at night, so lighting is inevitable, of course is part of a lighting electrical control system, so the electric control system to ensure the flexible control of lighting. The performance of the electrical control system in the small concrete mixing plant can reach the above points, which shows that the performance is very good.
2. Electrical control system of the requirements to achieve convenient input and convenient operation, and can accurately adjust and modify various materials set value; electrical control system must have perfect self-locking and interlocking functions, to ensure accurate and reliable operation of the system, an electric control system for the fault must have common fault detection and alarm function;
3. electrical control system of mixing station in small concrete weighing system with zero output, can automatically go to tare, correction for single gap, called the single material to fill the buckle weighing function, can more effectively control the measurement accuracy, and a light alarm device;
4. small concrete mixing station in the production of the entire work process requirements for electrical control system can realize automatic control, which can achieve the small concrete mixing station production site management personnel do not need too much will be able to complete the entire process.

Selection principle of concrete mixing plant

The forced concrete mixing station has good mixing quality, strong overload capacity, no segregation of discharge and high production efficiency, and can be suitable for concrete mixing with various performances. Forced mixer is widely used in commercial concrete mixer, but the structure is complex and the cost is high. Compulsory mixer consists of twin shaft, single horizontal shaft, vertical shaft and planetary forms.
Twin shaft mixer mixing due to good performance, high production efficiency, good adaptability, structure characteristics, good reliability, is suitable for the production of concrete; the single horizontal shaft mixer and single shaft mixer because of its structural features and adaptability of commercial concrete mixing equipment has been used less; planetary mixer application nor generally, in the imported equipment.

How can the small concrete mixing plant be properly commissioned?

Small concrete mixing plant is widely used in the presence of highways, bridges, power stations, dams and other projects engineering construction field operations. While also restructuring according to the special requirements to meet user needs. So when the concrete mixing plant is installed, it’s time to debug the equipment, the question is, how to how to properly debug it?

First emergency button is reset when the debug control system, on the electric power supply cabinet disclosure off, after turning on each branch circuit breaker closing order, the control circuit power switch, the power switch control chamber, there was observed no abnormal electrical system, If the air pressure to meet the requirements of the button after the start in accordance with the button to start the gas control door, check the action (if the air pressure to meet the requirements of the button after the start of the gas control door, check the action of the motor, Whether the flexibility; the computer to zero and adjust the sensitivity; check the air compressor switch is normal, barometer display is correct, the safety valve to adjust the standard range; the mixer to test run to see if there is abnormal sound, the various components Whether it is working properly; in the commissioning of the belt when the need for operation, in the course of operation to check whether the operation of the roller is flexible, to carefully observe the belt, can not have swing, deviation, grinding, slipping, deformation, etc.; be sure to press the debugging concrete batching what ingredients button to see if flexible and Configuration accuracy, then debug reference formulation.

How to use concrete mixer safely?

Concrete mixer is a large mechanical equipment, from the safety and efficiency aspects, must be in accordance with the provisions of the process of operation and production, so as to avoid unnecessary trouble, affecting the production and cause staff risk. To this end, as a professional manufacturer of concrete industry, the machine to the majority of concrete mixing plant users to provide the following recommendations.
1. The installation of equipment. The stirrer should be installed on a solid ground to prevent dumping due to ground subsidence. Electric power driven mixer, power distribution equipment should be installed appropriate fuse and grounding device to ensure the safety of electrical systems.
camelway js1500
2. Before the operation. Should check the machine and brake is flexible and reliable, whether the wire rope broken wire damage, the protective device is to check whether the clutch and the brake is flexible and reliable, whether the wire rope is broken, the protective device is Complete and reliable, and test run; such as stirring cylinder rotation smooth, not beating, do not run away, hopper up and down the door and flexible, hoop under the cam body is normal, can work; mechanical operation prohibited by hand or other objects Into the mixing tube to fiddle, cleaning and repair work.
3. Homework. In the operation of the mixer, do not let the gravel fall into the running part of the machine, to avoid the parts are jammed and damaged; after the hopper lifted, the hopper is prohibited or stopped, such as must be under the maintenance, should stop Cut off the power, and the hopper hanging with the insurance chain after the prospective. Feed hopper should be slowly put down, so as not to fall too fast, damaged parts or failure; before the material can not be no reason to stop, but can not start feeding, feeding capacity can not exceed the specified capacity. Before the hopper is not stopped, no feed; prohibited overload.
4. After work. After the mixing work, to clean the mixer in time to prevent concrete agglomeration. When cleaning, to prevent electrical equipment damp. Cleaning work must be carried out after the power to prevent electric shock; the operator must enter the mixing tank for cleaning or maintenance, should strictly control the power to prevent accidents; when the mixer full load operation suddenly power failure or failure, Apply the manpower to remove the contents of the mixing cartridge, and then check or repair; not allowed to start the mixer at full capacity, to prevent the start when the current is too large and damage the motor.
Zhengzhou CamelWay Machinery Co., Ltd. Main concrete mixer, concrete mixing station, stabilized soil mixing station, concrete batching machine, concrete conveying equipment, please call to discuss!

Preparing work of the demolition of the concrete mixing plant

When the concrete mixing plant  users to complete this project, to do the next project, it is likely because of the distance from the need to move the entire mixing station in the past, this time first need to mix the concrete mixing plant mixing station, Build mixing station as complex, but also need to do a series of preparatory work, how to do this preparatory work? We will briefly introduce!
The removal of concrete mixing plant is also dangerous than the price, so the removal of the tools and all the safety tools should be done to improve the inspection, check the first step is to clean up the construction site, and then the mixer, batching machine, screw conveyor and Cement warehouses and other equipment inside the remaining clean material, clean up to pay attention to all the power, pay attention to safety; clean up all the connected air supply lines, water pipes are finishing; Finally, power, control The power supply and all the control wires are released.
After the cleaning described above, in the inventory of these devices to ensure that the equipment is complete and intact, the removal must be the presence of professional staff, the best in accordance with the first on the next, the first outside the way after the tear down!

Elba ready mix concrete batching plant used @kalsel

Belt Type Concrete Batching Plant, featured with simple structure and small floor area, is an ideal choice for small and medium project. The unique angle design between hopper and track makes the filling and dumping process of aggregate materials more efficient. With our patented technology,CamelWay concrete batching plant has 30%-45% higher efficiency than the average level.It’s suitable to be used in bridge, road, dam, airport and other big scale construction project.
cement batching plant
Characteristics for elba concrete batching plant

1. Modular design, convenient to relocate and transfer, it takes just 5-7 days to complete installation;
2.Compact structure, requires little land;

3.Completely mobile steel structure foundation;

4.Accurate dosage system, ensuring concrete quality;

5. Intelligent management system, easy to operate;

6. Green and environment friendly, fully enclosed structure, effectively controls dust and noise pollution.
control system

Zhengzhou CamelWay Machinery manufacture has an extensive user base in the country, enjoying a high popularity. Some products are exported to Vietnam, Laos, Kazakhstan, Mongolia, Russia, Cuba, Brazil and other countries, being highly praised by foreign friends. If you want to know more information about the concrete mixing station or buy it, you can contact us.

Used Construction Engineering concrete batch plant in Pakistan

120 Compact Concrete Batching Plant which is equipped with 3000/2000 l. The twin shaft mixer and 4×20 m³ aggregate storage bin can be transported quickly and economically to anywhere in the world due to its folding and modular designed structure.
batching plant
Compact Concrete Batching Plants, which based on high technology and experience since 1975, provides the following advantages to its users:

– Quick and easy installation (only 2 days)
– Cost effective sea and land transportation
– Possibility of installation on a confined space
– Quick and easy relocation
– Flexibility in the configuration
– Minimum foundation cost (only flat concrete surface is adequate for installation)
– Easy maintenance and low operating costs
– High production performance with optimized automation system
batching machine
Zhengzhou CamelWay Machinery manufacture is one of the large-scale enterprise specializing in construction machinery. We warmly welcome worldwide customers to contact us to get the latest quotation.

Islamic Pakistan Concrete production mix Machine price

There is a wide variety of equipment for processing concrete, from hand tools to heavy industrial machinery. Whichever equipment builders use, however, the objective is to produce the desired building material; ingredients must be properly mixed, placed, shaped, and retained within time constraints. Once the mix is where it should be, the curing process must be controlled to ensure that the concrete attains the desired attributes. During concrete preparation, various technical details may affect the quality and nature of the product.
hzs batching plant
When initially mixed,cement and water rapidly form a gel of tangled chains of interlocking crystals, and components of the gel continue to react over time. Initially the gel is fluid, which improves workability and aids in placement of the material, but as the concrete sets, the chains of crystals join into a rigid structure, counteracting the fluidity of the gel and fixing the particles of aggregate in place. During curing, the cement continues to react with the residual water in a process of hydration. In properly formulated concrete, once this curing process has terminated the product has the desired physical and chemical properties. Among the qualities typically desired, are mechanical strength, low moisture permeability, and chemical and volumetric stability.
mixer
Zhengzhou CamelWay Machinery manufacturer produces tower cranes, construction elevators, concrete mixing stations, JS concrete mixers, concrete batching machines, stabilized soil mixing stations, wheel loaders, concrete transport tanks, JZC concrete mixers and other construction machinery.
If you are interested in our products or want to know more information, please leave your contact way, for example, name, nation, and your contact way (email, or phone number, whatsapp, skype, viber, wechat). We will give you a reply as soon as possible.

Rabat High capacity concrete batch plant supplier

Do you need a high capacity concrete batch plant or require a ready mix plant that will produce higher quality concrete repeatedly to meet precise mix designs? BMH Systems designs and manufactures customized Central Mix Plants, also called Wet Concrete Batch Plants, that meet any capacity and requirement, whether you’re planning to retrofit existing facilities or start from the ground up.
batch plant
FEATURES :
Choose from a variety of concrete mixer sizes
Easily retrofit your existing facilities
Provisions for future expansion
Small to extra-large production capacities
Aesthetic design
Small footprint due to reduced dynamic loads
Customized to fit perfectly with your existing installations or specific needs
More homogeneous mix in a shorter time with the RollMaster® reversing drum mixer
Fast and clean loading process of your ready mix trucks
Complete dust control
Dual or complementary dry batch bay available
control system
Features:
Consistent quality concrete on every load
Increased production capacity
Faster loading of transit mixer trucks and turnaround
Less maintenance of transit mixer trucks
Long life span
Cleaner trucks and environment


ADVANTAGES :
Can batch up to 15.5 yd³ of 12″ slump concrete without spillage
Can mix 1″ slump concrete at 100% mixing capacity
Shorter mixing time made possible due to a unique blade arrangement
Fewer moving parts lead to a reduction in maintenance
Desired concrete slump is easily obtained with motor’s power reading
Rapid discharge at variable speed
Parts available locally