Things you might want pay attention at when you installing a concrete mixer

Things you might want pay attention at when you installing a concrete mixer
JS series concrete mixer is a powerful mixing machine also the biggest seller in camelway machinery. With the mission of convenience we decided to bring up a topic related to the question of how to use the concrete mixer properly.
1.The installation process
The concrete mixer is supposed to be installed in plain area,and the legs of the mixer to should be put on hard concrete ground.the pit should be higher than the ground to avoid that the water may flow into the pit.
Users should lift the mixer with a crane, and then install the leg, ladder and slide. Users should keep the rack in the same level, and the track may not be skewed and dislocated by improper installation procedures.
2.Check up you machine before you use it.
Take care of the gear box and the lubricate condition inside of the mixer
Check the power supply voltage of concrete mixer, and the rated voltage should be 380 volts, and the error should be within 5 percent.
Check the connection of motor and electrical components, and the distribution box shell must be reliably connected with the ground. All pipelines should be properly placed to prevent crushing or bumps caused by accidents.
Check the connection bolts of various parts of the mixer, especially the moving parts, and users should timely tighten it if loose.